Wall Tap
A bottle filler on a wall plate. Our most requested model for schools and sports clubs because it is compact and the lowest-priced filler we make.
Wall-mounted water bottle refill stations
A wall-mounted water bottle refill station is the smallest way to add a fill point: a stainless steel tap on a plate, bolted to a wall that already has water behind it. No cabinet, no foundation, no power. It is also the least expensive bottle filler we make.
Wall models
One plate, three versions. Mix them on the same wall if you want a filler and a fountain side by side.
Get a quote
Wall Fountain
The same wall plate with a drinking fountain spout instead of a bottle filler. Often paired with a Wall Tap next to it.
Wall Tap + Drip Tray
A Wall Tap with a drip tray and siphon below it, for indoor walls and finished floors.
List prices 2026 in euros, excluding VAT, shipping and installation. A Wall Tap with its own cabinet and two outlets is €3,595.
Where a wall station makes sense
Anywhere the wall is closer to a water line than the floor is. In practice that means:
- School corridors and cafeterias. Kids fill up between classes without a detour. The Wall Tap is by a wide margin what schools and sports clubs order from us.
- Gyms, locker rooms and clubhouses. There is already plumbing in the wall and usually a floor drain nearby.
- Outside walls. The side of a clubhouse, a park restroom building or a trailhead shelter. The tap is the same one used on our free-standing outdoor posts.
- Back-of-house. Staff areas, warehouses and workshops where a cabinet would be in the way.
Bottle filler, fountain or both
The Wall Tap has a downward spout for bottles. The Wall Fountain has an upward bubbler for drinking without one. In a school or a public building it is common to mount one of each: older kids and adults use the filler, and nobody without a bottle goes thirsty.
Indoors on a finished floor, choose the Wall Tap + Drip Tray. The tray and siphon catch what misses the bottle and send it to the drain instead of onto the tiles.
What the wall needs
- A water line with a ½-inch connection behind or beside the plate.
- A way for water to leave. Indoors that is a connection to the building drain. For an outside wall, tell us what is below the tap (paving, soil, a gully) and we will advise on the drain.
- A solid mounting surface. The station comes with an aluminum base plate and its wall mounting system. Your installer picks the anchors to suit the wall.
There is no electrical work. The push button closes by itself, so a wall station cannot be left running after the bell.
On playgrounds and beside sports fields, sand and grass clippings end up in the drain. Ask for the raised base plate, which keeps the outlet clear.
Finish
Black and white are in stock. White is the practical choice indoors because it hides limescale. School colors or a club color are possible in any RAL shade, from €350, and a logo sticker (€95) turns the plate into a small piece of signage.